Water level radar meter adopts a recommended industry emission frequency of 26GHz, so its beam angle is small, concentrated energy, has stronger anti-interference ability and greatly improves the precision and reliability of measurement of rivers, lakes, shoals, and reservoirs, river flood control etc.
The new fast microprocessors have faster speed and efficiency and can perform signal processing. Water Level Radar Meters are used in water conservation and hydrological sites to measure changes in the water level of rivers, lakes, shoals, and reservoirs. They also aid in river flood management. The horn-shaped antenna uses non-contact level measurement and has a measuring range of up to 30 meters on average. Its accuracy is significantly higher than that of other types of liquid level meters, and it is tiny and simple to install.
Product Name | 26G radar water level meter |
Model | WERD808 |
Medium | rivers, lakes, shoals, and reservoirs, river flood control for water conservancy and hydrology |
Process Connection | G1-1/2″A thread, vertical bracket, flange |
Measurement Accuracy |
± 5mm |
Display | LCD, Programmable |
Material |
Antenna : Stainless steel (RD803); PTFE(RD808) |
The seal between the shell and the shell cover: Silicone rubber | |
Casing window: Polycarbonate | |
The ground terminal: Stainless Steel | |
Housing : Aluminum / Stainless steel | |
Cable parameters | Cable entrance / plug: 1 M20xl.5 cable entrance ;1 blind plug |
Terminal : Conductor cross section 2.5mm² | |
Power Supply: | 2-wire(DC24V)/ 4-wire(DC24V /AC220V ) |
Output signal | 4… 20mA / HART (2-wire / 4-wire ) |
RS485/ Modbus | |
Blind area | the ends of the antenna |
Maximum measuring range | 70m( RD803); 30m(RD808) |
Pressure | -0.1-0.3MPa |
Adjust time | about 1 second (depending on the parameter settings) |
Explosion-proof Grade | ExiaⅡC T6 Ga / Exd ⅡC T6 Gb |
Process temperature | -40℃~130℃ the temperature of the antenna part |
Working & Storage Temperature | (-40~100) ℃ |