- Have any questions?
- +86 15953537010
- admin@wepower-electronic.com
Fuel Magnetostrictive Level Meter
The fuel magnetostrictive level meter is designed based on the principle of magnetostriction .It is composed of a sensitive waveguide wire, a waveguide , a moveable magnet, and electronic components that emit electrical pulse signals and receive return signals.
What’s The Working Principle Of Fuel Magnetostrictive Level Meter ?
The Fuel Magnetostrictive Level Meter is designed based on the principle of magnetostriction . Fuel magnetostrictive level meter is composed of a sensitive waveguide wire, a waveguide , a moveable magnet, and electronic components that emit electrical pulse signals and receive return signals.
When the pulse microwave generator in the electronic probe generates, the electric pulse is transmitted along the waveguide wire in the steel pipe , the electric pulse is accompanied by a circular magnetic fields perpendicular to the waveguide wire and transmits along the waveguide wire at the speed of light . When the pulsed toroidal magnetic field and forms a mechanical torsion wave on the waveguide wire. This torsion wave returns to the electronic probe at the speed of light , causing the two coils to pulse induction at the end . By measuring the time difference between the power generation pulse and the induction pulse generated by the torsion wave time , the temperature sensor is placed in the measuring rod to continuously measure the temperature of the medium. If you are in need of Fuel Magnetostrictive Level Meters, contact us!
| Product | Fuel magnetostrictive level meter |
| Power Supply | 24V±2.4V. DC |
| Working Temperature | Electronic Part：－40 ℃ ～ + 80℃ |
| Measuring Rod ：－40℃ ～＋110℃ | |
| Range | Hard Rod：150mm～7000mm，Soft Rod：Max20000mm |
| Output Signal | 4～20mA；0～5V；0～10V；±5V；±10V；RS-485 |
| Linear Error | Better±0.05%FS；When Rangeless than 300mm,Error less than150μm |
| Repeatability | Better ±0.002%FS |
| Output Temp Drift | 50ppm/℃ |
| Power Consumption | ≤50mA |
| Output Ripple Current | ≤20mV |
| Fade Zone | Fade Zone ： Soft Rod :100mm(Upper ,300mm(Under) |
| Hard Rod：51mm (Upper)，36mm(Under);Can Be Changed According To User’s Requirement | |
| Load Capacity | 4～20mA Output：Load Capacity ≤500Ω |
| 0～5V，0～10V Output ：Min Controller Load≥5kΩ | |
| Measuring Rod Material | 0Cr18Ni9、1Cr18Ni9Ti Or Customized |
| Housing Material | 1Cr18Ni9Ti |
| Wiring | 1.Shielded Cable Connection，Standard Length 1.5m(Can be Changed ) |
| 2 Aviation Plug Connection | |
| 3.Terminal Connection | |
| Float Material | 0Cr18Ni9、SS316、Nitrile |
| Process Connecting | Thread,Connecter Head,Positioning Ring , Suspension or Customized |
| IP Grade ： | IP65 |
▲Thread
▲Flange
▲Cable
| Ordering Information Sheet | ||||||
| Magnetostrictive Level Sensor | ||||||
| CODE | TYPE | |||||
| A | Standard | |||||
| B | High Temp | |||||
| C | Sanitary(Hygienic) | |||||
| / | CODE | Length | ||||
| 01 | 1000mm（Standard ） | |||||
| 02 | Tube Extension 1000mm～3000mm | |||||
| 03 | Cable Extension Split 1～20000mm | |||||
| / | CODE | Power Supply | ||||
| D | 24V DC±10% | |||||
| / | CODE | Material | ||||
| 1 | SS304（Standard )） | |||||
| 2 | SS316 | |||||
| 3 | Anti-corrosive ,With PTFE Coating | |||||
| / | CODE | Process Connecting | ||||
| G | G1”Thread （Standard)） | |||||
| T | 1”NPT Thread | |||||
| C | Other ( Customer Remark ) | |||||
| F | Flange（Please Remark Flange Spec) | |||||
| / | CODE | Other Parameters | ||||
| A | Normal Temp: ℃ | |||||
| B | Normal Pressure : Kpa | |||||
| C | IP Grade：IP65 | |||||
| D | Explosion-proof ：ExdⅡ CT5 | |||||
| E | Max Temp: ℃ | |||||
| F | Max Pressure: Kpa or Mpa | |||||
| （） | Other Request | |||||
| / | ||||||
| A | 01 | D | 1 | G | AB (EXAMPLE ) | |
